3 Way fuel solenoid for diesel engines 24V 6W EG3 C.E.I.

This G3 Diesel Fuel Stop solenoid valve immediately and safely shuts off engines by reversing fuel flow and creating a vacuum in the injection pump.

This 3-way solenoid valve will stop a diesel engine very reliably in any situation.
Because, unlike normal stop magnets, which operate on the stop lever of the pump and become ineffective when the fuel rack sticks, this valve acts directly on the fuel supply to the pump.
In the stop position, the suction side of a fuel supply pump and its outgoing side are inverted, which then creates an immediate vacuum in the galley of the fuel injection pump, the engine speed immediately drops to zero.
The same valve can be used in "Power to turn" or "Power to stop" mode by inverting the connection hoses.
The installation of the G4 valve is fairly easy. The accompanying description illustrates the connection method for both modes, which are also indicated on the valve itself.
Working Principle: 2 position 4 way solenoid valves with sleeve
Supply voltages

G3 - 24 Volts: 20.0 - 28.8 VDC (- 40 ° C to + 100 ° C)
Current consumption
G3 - 24 Volts: 0.41 - 0.72 Amp.
Max Pressure: 4.5 bar at injection pump
Flow rate: min. 360 liters / hour at 1.3 bar
Duty Cycle: 100% duration
Temperature range: - 40 ° C to + 130 ° C
Vibration shock: up to 20 G, @ 50 - 500 Hz
Electrical connection: Cable 200 mm long with Packard connector
EC 1300 Mating connector EC 1310 included
Insulation class: H - tested at 1600 VDC against ground
Certification: CE, according to EN 50082-1, EN 50082-2 and
EN 50081-1, EN 50081-2